Summary

prototype Dial Indicator, sensitive to 0.02mm,
Print Settings

Printer Brand:
Creality
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2 or .3</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>this Dial allow you to get very close to nozzle position, it's very sensitive (can push it with paper), and precise (detects touch at .02 height change), repeatable (did Z Up/Down 10 times, detect touch always at same value Z height) </p><p>If I there is demand, I will remix with universal Holder, and I will work on a compact version that will fit at Z0 for bed tramming. This One requires to be at Z39 or higher to not drag on the bed.</p><p>I printed with Nozzle .6, it's quite forgiving as the only really sensitive part is the needle, which is just a 1mm width, you can tune Z in slicer (scale), worked for me at .2 and .3 height.</p><p>The needle is hold by friction, and can be changed, I wouldn't glue it as there is no need for functionality, and can swap it if needed. Print Needle, slide fit it, trim to size :)</p></div>
Dial Indicator prototype Bed Level
