15mm Pipe Soft Jaws for 1.5" jaws on Harbor Freight 2-1/2" Table Swivel Vice

Pipe holder soft jaws for the 1.5" jaws of the Harbor Freight 2 1/2" Table Swivel Vice.

Print with the jaw face up, no supports needed. Tested at 20% infill in PETG, should be fine with the same in PLA, likely OK in TPU, but not tested.

Can use the original jaw mount screws or M4x8mm cap screws.

Onshape link: https://cad.onshape.com/documents/7782d57a74c7aa54a974fe82/w/295446819f163506e078d030/e/8c313b748aae4b947060401e?renderMode=0&uiState=6769b11cac116a2e440a69f1