Summary

I was making a horse paddock for my daughter to play with, and Hammerbarn was too far away and costs too much, so I decided to design my own print-in-place strap hinge.
It's 100mm from edge to edge.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>It prints fine with a .4mm nozzle, though the smaller the nozzle/layer height, the nicer it will be :)<br>It was strong enough printed in PLA+, but if you're using it for any outdoor purposes, maybe try a PETG or ABS filament</p></div>

Strap Hinge - 100mm print in place