Prova tolleranza gap clearance test

Italiano:
Test per verificare l'efficacia dello slicer nel compensare i fori (correzione espansione orizzontale dei fori), della tolleranza con i fori interrotti e della tolleranza con i fori sull'asse verticale, da verificare inizialmente con un azione manuale di rotazione o inclinazione sulle due linguette superiori presenti su ogni sfera (se non si rompono il gioco tra i pezzi sarà alto), poi verificare tramite un giravite a taglio se le sfere si sbloccano (se si sbloccano il gioco è adeguato).
Sono presenti due modelli, uno semplice per la verifica iniziale ed un secondo modello munito di prolunga, la quale serve per allontanare il blocco di fusione dal pezzo e favorire il suo raffreddamento e stabilizzazione, in modo da verificare se il raffreddamento incide sull'accoppiamento.

Inglese:
Test to verify the effectiveness of the slicer in compensating the holes (correction of horizontal expansion of the holes), of the tolerance with the interrupted holes and of the tolerance with the holes on the vertical axis, to be initially verified with a manual rotation or tilt action on the two upper tabs present on each sphere (if they do not break the play between the pieces will be high), then check using a flat screwdriver if the spheres unlock (if they unlock the play is adequate).
There are two models, a simple one for the initial check and a second model equipped with an extension, which is used to move the casting block away from the piece and facilitate its cooling and stabilization, in order to verify if the cooling affects the coupling.

Artillery Hornet Firmware (290°C & Input shaping):
https://github.com/fanXbox/hornet-firmware/releases