Toy Police Car

Since the toy was designed in mm, scaling up to approximately 800% will improve bolt tolerances and tire rotation. All bolts are best printed upright at 50% infill to avoid breaking when being torqued or the toy is dropped. The body, tires, and cab's infill is 20%. Support (only touching build plate) is needed for the tires and the cab. No other parts require support. no build plate adhesion is necessary if you have a good plate. There will be 18 pieces when completed. Headlights are glued in after, since it was designed with a single-head printer in mind. Consider supergluing the tail lights in place if a choke hazard exists.