Tormek T8 drip tray brace

Brace to hold a drip tray on the open side of the grinding wheel. Useful when doing long knives or tools like machetes. Catches water and returns it to the reservoir instead of onto the workbench, Used the tray from a T4 design that I found on Cults. Was detail 1:https://cults3d.com/:801867
Not necessary to use that particular tray. Any tray 3mm thick at the reservoir edge and straight bottom would work. Length on the T4 tray was about 240 or so, so it had to go diagonally on my E5. Tray could be narrower and longer but then have to be careful not put too much pressure on the brace. Used two braces. No reason that the brace couldn't be modeled as wider, or that multiple copies of the brace couldn't be used for added strength.