Adjusted 2.5" to 3.5" HDD/SSD Adapter

Some adjustments for TBRIshtar's design, which, as is, did not fit in my Cooler Master tool free brackets:

1. Re-create the model using fusion360 so that anyone can modify it
2. Move supports inwards to make the adapter friendlier with angled cables
3. Adjust 2.5" side: +0.25mm to make it easier to insert the 2.5" drive into the adapter
4. Adjust 3.5" side to stay within tolerances documented in Western Digital White Paper: 3.5-inch Form Factor Mounting Screw Locations and Depths:
   • +1.25mm width
   • +0.2mm hole size
   • -0.40mm hole spacing