Particle filter for 3/4" hose

As I was looking at the designs posted on Thngiverse, I saw the "Inside Spool Silica Gel Container" and thought I could use it to make a new filter suitable for my waterpump.
I enlarged this design and fitted a thread on both sides of the basket to make it easier to clean.
On one side, let's call it the top, I fitted a 3/4" thread to connect it to the hose of my pump.

I fitted this filter to my Einhell GC-GP 6538 water pump, to prevent larger particles from clogging the pump.

I printed the basket and TOP lid with support touching the buildplate only.

If you would like to use it, please do, if you don't want to use it, ………