Summary

Hey folks,
I recently purchased a Beelink SER8 and needed something to attach it to my VESA compatible display stand. Since there was nothing around to buy or directly print, I reckoned I'd design one and print it.

I chose VESA 75 since it's also compatible with VESA 10.

Also I'm sharing the Freecad file so you can do your own changes if you wish.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>K1</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> Porima PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>While removing the print from the bed I found that the adhesion was way too strong and I snapped some layers to some extent so I had to glue those places. So be careful about that.</p></div>

Beelink SER8 VESA Mount