Cardfight!! Vanguard Power Counters & Crit Token

My son and his friends play Cardfight!! Vanguard and a while back I printed out a bunch of Power Counters designed by MintyTwirl (https://www.thingiverse.com/thing:6407326). The counters were great, but I didn't like the way the side facing the build plate came out. So, I decided to give designing my own a go. I went with the standard 6-sided die that allowed me to print with a blank side on the build plate. I added filleted edges to give the counters a smoother appearance and made the engraving depth 2mm for easier reading.

The four Power Counters consist of the following:

• 1K Counter: +1k, +2K, +3K, and +4K
• 2K Counter: +2K, +4K, +6K, and +8K
• 5K Counter: +5K, +10K, +15K, and +20K
• Extra Counter: +1D (for +1 Drive), -1D (for -1 Drive), +PER (for +Persona), and 100m (for +100,000,000)

Printing is really simple:

• No supports needed
• I use a 25% infill, but I imagine 10% - 15% would be fine (I just like a little extra weight)
• I print at .16mm to create a smoother finish but .2mm will also work nicely
• Material: PLA

This is my first go at creating and uploading a model to Thingiverse so please share any constructive criticism you may have. Enjoy!