GridForge Wall concept and Gridforge Mount insert

Gridforge is a quickchange tile system developed by 2nd Dynasty.
https://www.myminifactory.com/frontier/gridforge-3312

The underlying grid structure is free to use (The Base Grids and Supporty Clips are licensed under Creative Commons Attribution-ShareAlike 4.0 International, enabling modifications while ensuring that any changes remain accessible to the community under the same open terms.)
https://www.myminifactory.com/object/3d-print-gridforge-grid-clips-and-sample-tiles-431600

There are template tiles available for modification (The Template Tiles are licensed under Creative Commons Attribution 4.0 International, allowing you to create and even sell your own floors, furniture, or entirely new designs commercially.)
https://www.myminifactory.com/object/3d-print-441828

Building on the excellent Gridforge System, I made a start on designing partition wall pieces that will hopefully be self supporting.

The following pieces are currently available:
Wallbase: connects a floor mounted Gridforge Section to the upward wall. The wall will be formed of a double layer of Gridforge flooring, back to back and 1/2 a square offset for strength. The Base would also form a top section for the wall to finish it's height.

Mount 4x4x1 : this is a strengthening piece intended to be inserted mid height on the wall to firmly secure the two grid sections together.

Mount Insert: this piece is intended to be merged into any sized gridforge Base to provide a fixing point to a surface. glue or screw, just to make a gridforge section permanently mounted to a baseboard (or wallboard).

A quote from the creator on my wall pieces: "I can't stop people from doing this, but this is well outside the intention or design of gridforge."