FlashForge Creator Pro Filament Monitor Mount

I purchased a set of filament monitors made by Aaron Tunell from here: http://www.thingiverse.com/thing:345216. The bracket available for print do not fit the FlashForge Creator Pro. I took the original design and lengthened the brackets to fit.There are four screws on the top of the back plate to hold the Z-axis assembly in place so I made room for those as well. The back brake that hold the sensor arms and bolts to the print did not fit either. I ended up just using a dermal to create a channel for the bolt. I modified the bracket and is should work but I have not printed it out.