SkillsUSA Urban Search and Rescue (USAR) Robotics Simulated Ordnance

After searching around for models of the ordnance block in the SkillsUSA Urban Search and Rescue competition, I was frustrated to find only one result (https://www.thingiverse.com/thing:5279221) and it didn't really have the same shape as the picture in the competition description. I used a picture of the official piece to model it and made sure the dimensions matched the requirements of 2.7 inches cubed.

I printed this in red Hyper PLA on a Creality K1 Max at 37.5% triangular infill. I just adjusted the infill until it gave me the desired weight of the simulated ordnance which is 4.3 ounces (approx. 122 grams) according to the slicer. I don't have an accurate scale to confirm, but it seems right and the slicer said I have it within a quarter of a gram. Judge for yourself, but I think the result is durable and accurate to the original.

The other model I linked to above did have a clever method of adding a quarter coin for weight but adjusting the infill seemed quicker, easier, had a more uniform weight distribution, and was less fiddly. I didn't think the hassle was worth it to save a few cents worth of filament.