Summary

Raspberry Pi 5 Case that allows for aftermarket fan, maintains accessibility of all connectors on the board, and provides holes to circulate airflow through case.

Print Settings

Printer Brand:

Bambu Lab

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Bambu X1C</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.12mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>

Assembly Instructions:

Bill of Materials with respective Mcmaster Carr Part Numbers:

            <div><p>Screws:</p><ul><li>8X M2X0.4 Screw, 4mm Long (91292A004)</li><li>12X M3X0.5 Screw, 8mm Long (91292A112)</li><li>5X M3X0.5 Screw, 20mm Long (91292A123)</li></ul><p>Washers:</p><ul><li>8X M2 Washer, 5mm OD (93475A195)</li><li>17X M3 Washer, 7mm OD (93475A210)</li></ul><p>Threads:</p><ul><li>4X M2X0.4 Standoff, 6mm Long, 4mm Hex (93590A101)</li><li>17X M3X0.5, 4.3mm Long (94459A130)</li></ul></div>                <p class="detail-title"><strong>Assembly Instructions/Guide:</strong></p>            <div><p>Raspberry Pi is fastened into case using a screw/standoff combination with washers, every other fastener is screwed into threaded heat inserts.</p><p>Pictures are included showing heat insert install locations and standoff stackup. Install heat inserts flush to surface. Power Button should be installed into bottom clamshell before installing Raspberry Pi to lock it in position. Install Front &amp; Side Panels while case is sitting on a flat surface to locate connector hole positions.</p></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/d0/53/e6/0d/88/CLAMSHELL_HEAT_INSERT_INSTALL.PNG"></p>                <p class="detail-caption"><strong>Heat Insert Install in Bottom Clamshell</strong></p>            <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/eb/e2/a8/a2/62/PANEL_HEAT_INSERT_INSTALL.PNG"></p>                <p class="detail-caption"><strong>Heat Insert Install in Top & Bottom Clamshell</strong></p>            <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/f1/6a/6b/1b/83/PI_STANDOFF_STACKUP.PNG"></p>                <p class="detail-caption"><strong>Raspberry Pi Standoff Install Stackup</strong></p>