Solidoodle Bed Stabilizer

EDIT: Some people had problems due to printer setup and needed 2 long arms or 2 short and also wanted parts broken up...I've included two pairs of short and long, and redesigned blocks with larger rod holes and just single hole for screw (2 wasn't needed )

This will work for SD 2,3,4 and apprentice. The left arm is shorter to allow the door on the 4 to close fully. You will lose about 20-25mm in the z axis. Makes bed rock solid, the springs will still allow bed to move but as for frame shacking or vibrating....zip, zero, nada