G933 G935 G633 G635 earcup hanger/holder

G933 G935 G633 G635 earcup hanger/holder to replace often broken and fragile originals, replacement costs 10-15 usd per part. This uses 2 screws from the original part but if they are lost glue or tape can work. Model is scaled up slightly from the original for some tolerance. To install remove the entire original part try not to damage or pull the cable it is poorly secured and there is a cable without isolation that can short the pcb if moved wrong, first put the cable thru one of the ends and get it as close to the hole as posible than use some amount of force to get the opposite end towards its socket it should then be locked and move smoothly, than attach it to the rest of the headphones, turn it slightly to get angle limiter over the inner lock when you cant pull it out when it straight and it aligns with the outer lock push the lock in and secure it.