Wider scrap box with separated feet

For Kobra 2 NEO (No idea if the Kobra 2 standard/max have the same rails honestly)

This remix is simple, I made the scrap box wider and lowered the right wall so the back connector of the bed doesn't hit it.
The extruding filament will directly land in it, also, I made the feet separated and the base slotted so they can be fitted into it (with fine prints even without glue). This makes the print way faster and less prone to failing.

The feet take in count the dept of the slot ofc (+2,5mm), and the slot is + 0.1 mm wider on all sides to compensate the print imprecision, if you print with bigger nozzles I guess you maybe will have to sand a bit of the feet anyway.

I printed it in 0.2mm and didn't even need glue to stick the feet into the slots pretty snug.

It's obvious but: you need to print the foot in 4 copies.