MTM Offroad jump pads

Jump pads for street and offroad, once you get a taste you won't go back, you will need at least a 300mm bed to print

I use the following configuration

• Printer : Elegoo Neptune 3 plus
• 0.8mm nozzle
• Use TPU 95A for comfort or use half of the print in PETG and the remaining half in TPU for more rigidity (sport riding)
• 1mm wall, 2 perimeters
• 10% Gyroid infill
• 5 Top, 5 Bottom solid infill layers
• 225c / 70c for TPU or 240c / 90c for PETG

Mirror the part to get the left side

Download the 3MF file if you can as it contains additional reinforcements