DIY SM7b Grill Modified

This is a file designed to work with the "fake" SM7b model uploaded here:
https://camerafoundry.com/products/sm7bs
I did not have access to the original file, so this isn't really a remix, as I made the CAD from scratch, just matched the original thread.

I simply found that the original file was too fragile, and chose to look more like the original Shure grill, rather than be optimized for printing. I made it have a more open grill, not require support. Simply print at the same orientation as shown in the pictures.
I found that printing at least 0.2mm will improve the thread, and allow it to print correctly.

Resolution: At least 0.2mm
Support: No