ROUTER BrosTrend S1 REAR BRACKET WALL MOUNT (221mm X 31mm)

ROUTER BrosTrend S1 REAR BRACKET WALL MOUNT (221mm X 31mm)

Any of the mounts require 2 screws (1 on each side) but if you add Optional Slider, then you need 1 per optional slider.

There is 3 Options to mount this router.

OPTION 1 ( SUGGESTED )
Front Mounted (Ports facing Down or Up)

• Optional Slider Add-on (untested) but should work

OPTION 2
Side Mounted (Ports facing either SIDE)

• Optional Slider Add-on (untested) but should work

OPTION 3 ( Minimal Filament )
Rear Mounted by the holes on the router

Tested with Drywall and Construction Screws