Stronger Mount for Camsteer Tail Mounts

Didnt like the original clamping mount provided with the tail mount from Camsteer

fabbed this out of PETG

4 walls, 70% infill

Designed to be a flush fit with Carbon selfie sticks especially insta360 action stick
this sticks are required for tail mounts of bikes as they are stiffer and less prone to failure

should also work with any carbon selfie stick with a top threaded mount as it needs to slide on

this is very flush so flush it needed some light sanding internally with 320grit due to shrinkage of filament

Tested it well in Mallorca 2025 descending down sa calobra and Ferminia