Transformers Dragonstorm The Last Knight Broken Dragonhead Fix V1

I've created a rudimentary fix for a very common point of failure for the Last Knight Dragonstorm figure. I may update the design to make it more streamlined, but it gets the job done for the time being. Please view the photos to get an idea of what the head attachment area needs to look like in order to use the print. I had to cut off a piece of the broken connector, and the part of the 3d print that slots into the arm slots into the 2nd slot (It'll make sense when you look at it). If you slot it into the first slot it'll be a loose fit.

In order to make this small print strong enough to hold the head without breaking the connector, please modify these settings to the following:
Filament is PLA
Wall thickness 1
Infill 80%
Infill pattern grid
Layer height .1
Wall line count 5
Print speed 30mm
Print temp 210