Vertical Socket Tray Craftsman Metric Impact

This Socket Tray is designed for Craftsman Metric Impact Sockets. The Design is for Vertical storage of ½” Drive Deep (CMMT 15887). It should also work for the ½” Drive Standard Sockets (CMMT 15885), although not tested.
Printed in 3 parts, A, B, C, and then glued together.
I included a Tab and a Socket to line the two parts up for Gluing them together.
I used Loctite Plastics which uses an Activator and a Bonding Glue.
Using a Raft when printing, helps to reduce warping at the corners.
To provide support, over the socket at the end, I use a support setting of 50 Degrees.
JohnBoy Walton