Penta collet

Penta collets for building fly fishing rods in various sizes.

3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2"

I printed these on a Creality Ender V3SE with the following settings in Cura. The gyroid infill was critical in making it strong enough for use. Have tested with PLA and PETG, both work but would suggest using PETG.

Super Quality (0.12 mm layer height)
Wall Line Count 4
Infill 20% Gyroid
Support everywhere