Parallel Guide for Milwaukee Track Saw (Also fits Festool and Yellowhammer Tracks)

I have found track saw parallel guides for Festool Track Saw Tracks, but because Milwaukee Track Saw has an anti-tip feature, the attachment to the track itself is not compatible. Even though you can use tracks from Yellowhammer, Milwaukee, and Festool with all of their track saws, there is a minor difference in the anti-tip slot that makes many of the Thingiverse designs incompatible where they attach to the track. I have redesigned the attachment to attach differently so that all three types of tracks can use this same guide. It likely works with other tracks as well, so if you try it and let me know, I will edit this description to reflect that info. I suspect that the DeWalt tracks are NOT compatible, but I am not sure. I suspect the Makita tracks are compatible, but again, I am not 100% sure

The Track attachment is designed to accept a standard 3/4" by 3/8" t-track. It bolts with a short 1/4" x 20 screw and nut. The sliding clamp accepts a 1/4" x 20 bolt. The tightening knob accepts a 1/4" x 20 nut (I press it into the recess using a vise). I suspect M6 Metric screws and nuts will work too, please let me know is you try those. You will need two sets of these. The Track Attachment slides into the clamping slot from the end of the track section