Black Diamond 1B Fractional collet stand

New collet stand for fractional bits for Black Diamond 1B.

There is a cutout file that you can print. Make sure your printer prints the right size. I don't want you to print and realize it doesn't fit. If not, I have included the FreeCAD file that you can edit and change the diameter. To incorporate the numbers, go to "part" and "extrude." Then, make sure you fuse it all together. Then export.

This was printed with an Adventurer 5M with the 0.4mm head (PLA).

There are two master files, one with 0.380" holes and one with 0.390". The 390 file has a loose fit.

I hope this helps.