L-Track Nut - M6 x 1/4"

A fitting to add a nut flush into L-track channel. I designed this around Van Essential's Venture L-Track but hopefully the profile matches other commercial l-track. No promises. This design is strong, but intended for light duty uses. Pull strength is high (I've hung from a single bolt), probably less so in sheer but I haven't done any rigorous testing to find out. Take care not to insert bolts more than 1/4" into the nut or you will end up scratching your l-track.

Several parts make up the assembly:

• 3d-printed nut housing
• 3d-printed locking piece
• M6x6mm weld nut - https://www.amazon.com/dp/B0DKXT4C7L
• M4x4x6 threaded insert - https://www.amazon.com/dp/B0DRFXJ7RR
• M4x6mm flat head screw - https://www.amazon.com/dp/B0D42BV8J3