On30 18 foot flat car with bulkheads

A simple "digital kitbash" of jimshafer and Luke_Washington's flat cars to roughly 18 scale feet. Comes with two tops, one with and one without end bulkheads, and two bottoms, one with CalcProgrammer1 and Josh_Herrala's coupler box integrated and one without. If printing the one with coupler boxes then you'll also need to print the coupler bottom plate from CalcProgrammer1's thing, didn't include it since that's completely unaltered from the original. Similarly if you want you should be able to use Luke's stakes in the stake pockets. Pick one top, one bottom, print both, glue them together, and then add your own wheel trucks and couplers, I recommend Tebee's on30 wheel trucks (with HO gauge 36" wheels) and Kadee 148 couplers (with 242 gear boxes if needed).

Update: upon printing them I discovered the stakes didn't fit when printed as separate parts. I added a version of the stakes with their mounting pegs shrunk so they'll fit, be careful with them as they're quite tiny.

Update the second: I realized that the bulkheads didn't really have a good spot to add a brake wheel, for the basic flat it should be simple enough to drill a hole and add one, but on the bulkhead there's less room and most bulkhead flats that I've seen have horizontal brake wheels mounted on the bulkhead frame. So I made a simple little brake wheel rig that can be attached to the bulkheads, just print off two of the on30_brakerig_x2 file and fit them in between the vertical beams on the bulkhead.