Rubber Tool Clamp Bracket and Brace for SXS Roll Bar

I purchased several Harbor Freight "Rubber Tool Clamps" for $5 rather than ones with the billet clamps for $50 plus. I figured I could try and print a bracket/brace for the clamps and save some money. The bar width is 45mm and I designed the clamp to be used with 1/16 adhesive rubber strips wrapped around the bar. I used M4 screws as I had them left over from a previous project. The difference between the two brackets is one has recesses for the M4 nuts. Depending on warping and how exact your printer will print, the recesses may end up being too tight. I have included the Fusion 360 file if you want or need to adjust anything.