On30 18 foot end platform gondolas, high and low side

Another digital kitbash of jimshafer's On30 rolling stock, this set came about as a bit of an accident while working on something more ambitious which is still in-progress. Basically it's a pair of 18 scale foot gondola cars with short platforms on their ends with brake wheel handles. Due to the difference in heights the brake wheel stems for the high and low side versions are separate pieces, I labeled them with highside and lowside so you know which one corresponds to which, either way you'll need two per gondola. As with before I've included versions with either CalcProgrammer1 and Josh_Herrala's coupler box, or cutouts for Kadee 242 coupler boxes, the files that use Kadee boxes are referred to as "nocoupler." I also included complete versions of both the high and low side versions, these integrate the gondola sides and the underframe into a single piece, requiring more support material but reducing the need for assembly. If you want to try the complete versions print one of the files labeled "complete," otherwise you'll need to print both a "topper" and an "underframe," either way you'll still need to print two of the corresponding brake wheel handle and glue that in to the completed print. As always the coupler box underside, couplers, and wheel trucks are not included, coupler box underside can be found in the source model, wheels and trucks can be sourced wherever you'd like.