EcoFlow Blade Upgrades

Several parts for EcoFlow Blade robot lawn mowers. The most important here is what I named the Motor mount, as it is the plate that the blade motor bolts to, and is often the first part to break. What I named Blade Assembly, perhaps poorly... is a part that bolts to the stock aluminum part to mount the blade disk its self. It is designed to accept these edger blades https://www.amazon.com/dp/B001OKBHMA?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_9&th=1. However, it will also require you to drill two holes into that edger blade to drop bolts through and secure to the stock aluminum part, preferably with loctite. I would suggest using the part itsself as a guide when drilling, and if possible, to use a drill press to ensure the holes are straight and properly spaced.

Other parts in here are vanity plate for the silly hub caps ecoflow snaps on there... blade guard is a part to replace the entire plastic deck. I named it blade guard because all it really does is keep the neighbors kids from sticking their fingers into the blade while it's spinning... and of course also providing a surface for the robot to wedge dog toys between the blade and the deck jamming it. I don't have a solution for dog toy jams, I've gone through many iterations, but balls and ropes continue to vex me.

There are two blade guards. One was designed to work with a second part, named here as blade guard bottom. However the spacing didn't allow for tall grass to stand up and cut properly, so I run without the bottom guards... and have made a second part that is a bit deeper to help protect fingers and puppies...

Blade deck and Blade motor cover work together, they are essentially the parts the blade motor hides under.

6/6/2025
Forgot to upload MotorGuard. This piece mounts flush to MotorMounts, its purpose is to block build up from wrapping around the spinning pieces.