Fokoos Odin-5 f3 Cura Settings Mod & Printing Profile

I have modified the end g-code for cura. The end g-code modification adds a small 1mm lifting of the nozzle before resting in x-home position, preventing the nozzle being dragged over potentially printed parts. The printing profile is a result of many hours of printing and tuning the profile, but i have a habbit of not leaving well enough alone, so decided to upload it here, so others have a good base to modify it where required. To import the profile, simply click settings, and import.
If you have issues with sliced models, i recommend setting "Hole Horizontal Expansion" and "Initial Layer Horizontal Expansion" to zero, as i have had issues with some purchased models.

Geeetech PLA Profile
https://www.youtube.com/shorts/yJ6pHHRmlls

i will link my video for how and where to place the files for anyone having difficulty.
https://www.youtube.com/watch?v=vxZn2fhbCzc

First Makers link for anyone who doesnt want the modified g-code, and the person who figured out how to export the files from the Fokoos Slicer

Fokoos Odin-5 F3 Cura Slicer Setting