bracket to hang Ryobi P241 right-angle drill/screwdriver

This is specifically for the P241 drill. See the photos. In my situation, I wanted the drill to hang off a 2x4 single stud on a 45 degree sloped wall/ceiling, with or without the larger battery. I used a pair of 1+5/8" Deckmate screw and made sure I found the stud.

I printed this on a Bambulab P1S at 100% speed with Novamaker black PETG. I used 30% fill with Gyroid infill pattern and the default wall thickness/loops. No supports needed.

I did not test with any other settings or filament.

My lifetime testing is for about 15 minutes. 8^)