E27 Led Support

This is a cylinder support with vents for led strips. I twas designed so you can use a E27 socket + rings to fix leds + lampshade on your support.
The diameter of 63.55mm was computed to match with 60 leds/m strips , so with each spire, the leds are vertical to the one from the previous spire. On my printer it wasn't exactly the case , due to a biased x/y calibration .
An be careful with you plate adjustement : one mounted , my support is not perfectly vertical and cented with my glass cylinder lampshade
Leave 1.5 / 2mm between each spire to allow convection flow to circulate.
I managed to use 211 RGB WS2812 leds on this 20 cm cylinder.