CB350- Engine Plugs

Here are some plugs I made for soda blasting the engine. This allows me to soda blast without completely stripping the engine. I updated the files to make the seals better. I'll update the pictures once I test. Everything should be a much better seal now. I have it so the exhaust uses the threaded bolts to secure the plug.

Carb Intake- I used the old carb boots to make a seal.

Tips- I used a light layer of dielectric grease where it enters the engine to make a better seal as a precaution.

Printed in TPU- 95A
2-3 Walls
4 top
4 bottom
10% infill