Inhalemate Inhaler Helper

An inhaler helper for those that struggle to press down the top. Works with standard length canisters.

Slip the inhaler into the press and fold into the hold until the notch fits into the canister top, but doesn't press down.
Wrap an elastic band around the hold and the press to pre-tension the inhaler (make sure the inhaler doesn't spray). There is a hook on the back to take up slack in the elastic band.

To Make:
Turn on supports.

You will need a 2mm metal pin to make the pivot (it's a tight fit).
I used a 2mm x 20mm, but any larger length will do up to about 30mm.
Buy more than one so you can use another one to hammer it into the centre.

Share your makes, Share with mates!