USB outlet for Child lamp on Hobby caravan

Our Hobby caravan just had Yellow plates on the kids bed lights. They can be removed and I added a custom plate with a USB-outlet and a switch.
One STL is the plate and the other is a protection when using a stick swith. Should preferably be a lower switch.

I used this switch I hade laying around. https://www.digikey.se/sv/products/detail/apem-inc/5636AB/1797861
But the hole-diameter is ca 6.3 mm so any one that fit would work. Or make your own hole in the slicer.

I used the same Amazon 12V to USB PCB:s that this project does: https://www.thingiverse.com/thing:4971288

https://www.amazon.se/gp/product/B07Q7TTD6C/

Stole 12V from the bed light.

I just used electrical tape to fasten the PCB to the printed part, The PCB gets pretty warm when in use.

I printed them in PETG on a Bambu printer using tree-support.