Pinball Leg Cabinet Protector Stern

This is a copy of what came with my Stern pinball machines. I took measurements from the metal ones on TRON (2012) and the plastic ones on Ghostbusters (2016) and Dungeons & Dragons (2025). Printed flat using "draft" settings for speed, the fold channel was two layers on my PrusaXL.

These are small to be hidden behind the steel legs, and to offset the legs so they do not damage the cabinet or decals. Stern has their decals such that they do not go under the protectors.

I made the bolt holes 3mm larger than the originals, just in case they get misaligned during installation. The screw holes fit 3mm countersunk screws, although you don't really need to screw them down. Sorry, I'm in the EU now, but I imagine that #4x1/2" countersunk screws should work instead.

I put them on a Williams and a Gottlieb machine, and they work fine.