1 1/2" square head plumbing plug extension with 1" square head

I needed to remove a plastic plug from a floor drain, it is a 1 1/2" pipe plug with a 1" square head. It was down deep and I could not get a good grip on it, and thought I might crush it if I kept going. So I made this extension tool, you can grab it with a wrench or use a 1/2" rachet. It might also work as a 1/2" to 1" rachet adapter. I used Overture Super PLA+, 4 layer walls, 8 layer top and bottom, 20% infill.