Turntable for 3D scanning

Three support‑free prints snap together into a silent, belt‑free turntable optimised for photogrammetry and laser scanning. No screws, nuts, or washers — motion is handled entirely by off‑the‑shelf metric bearings press‑fit into the 3D‑printed parts.

Bill of Materials (BOM):
1) 2 radial bearings 6700 10 × 15 × 4 mm
2) 5 radial bearings 6802 15 × 24 × 5 mm

Print‑bed clearance: Your printer must handle at least 250 mm × 250 mm to fit the base plate in one piece.