Ryyksword ~ inspired by Star Wars

* BargoDesign

Readme -

The Ryyksword is a Prop created by Bargo.
Inspired by Star Wars.
Inspired directly from a Wookie Weapon.
Its 60cm in length.

HOW TO BUILD IT
I created the file so that the Blade and Grip are printed separately.
The Blade and the Grip are connected and reinforeced with a M8 Metalrod and M8 Nuts
I printed the Blade and the Grip each in halfes.
I then glued the Blade with the Metalrod and Nut together using 5min Epoxy.
I glued the Grip together with the nuts inside(without the Rod)
when the Glue dryed i finished the prints (sanding, filling, painting)
later i screwed the rod into the handle with fresh 5min epoxy and fixed it with clamps so the handle and blade are aligned.
I then wraped the Grip in cloth for better grip.

**INFO***
When the Blade is to long or to short for your use keep in mind the scale of the holes are desigend for an M8 Rod and Nuts so if you scale it don't use uniform scaling.

It's possible that the Prop is not allowed on some Conventions because of the there Cosplayrules.