SteelSeries Arctis 9x Earcup Shell Replacement

Replacement shell for the SteelSeries Arctis 9x.

The added travel distance on the mute button should mitigate its issues. It completely solved mine so I did not have to replace it.

IMPORTANT
Print this in the highest detail you can. The tolerances are very tight and you will need to clean up the edges a little bit. I needed to carve out the top of holes for the power and Bluetooth buttons. I also needed to clean up the slot for the mute button.
Make sure to print outer walls first for higher accuracy
Please test fit the right side and try clicking the buttons before you fully install it. You most likely will need to clean it out with a box cutter or similar. The Bluetooth button should be silent click and the power button should be clicky.

I printed mine in PETG Pro.