LEGO F1 Collectible 4 car wall mount

This is an easy to print and mount to your wall with double stick tape, or drill a few small holes and use tapered screws.

The cars mount to the base with 2 studs that are extra long to create a firm clutch.

The mount is designed to be very light and efficient with filament. I printed it with 2 layers at the bottom and top, .2mm layers, and with adaptive cubic infill. The thin top layer combined with the infill design gave a nice texture to the top surface.

It used about 31g of filament and printed in 40 minutes.

There are 2 versions of the file. One with a debossed F1 logo. The other with an embossed or extruded F1 logo and LEGO logo.