Dollhouse LightShade for 3.5mm Wheat Grain 12V LEDs

Remixed Dollhouse Light for 12V 3.5mm Wheat Grain LEDs

This model was originally on Thingiverse for 5mm LEDs with the original design here:
https://www.thingiverse.com/thing:4899634

I've edited the original file to be for 3.5mm LEDs with a clearance factor of approximately .2mm (3.7mm) and a wiring channel at 2.5mm out the rear of the of the light shade (You'll have to drill a small hole for the wiring). I've also rotated the STL so that it prints correct oritentation with no supports likely being needed.

This should be suitable for most 3.5mm wheatgrain LEDs (12V)