3/4" PVC Filament Storage Bracket

I designed this bracket to fit a 3/4" PVC Charlott Pipe because that's what I had lying around. Printed on a Ender5Pro.
Designed to be expandable in all directions.

Layer Height: 0.16
Walls: 3
Infill: 20%
Supports: Tree (No supports needed on the horizontal holes)
Adhesion: 10 Line Brim

Will take approximately 42hrs to print a pair with this setup.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/48flewvNxRP