Toyota Yaris Smartphone Holder

Smartphone holder for the Toyota Yaris III
The tray must be pulled out with a little force. It is only clicked into place.

1. Place the template in the compartment and drill a hole ( hole can be plugged again when no longer needed).
2. Screw the magnetic smartphone holder (available from Amazon, for example; type see picture) into place using a long bit and the cover.
3. We recommend attaching foam tape as shown to prevent the insert from rattling, as there is still a little space between the part and the compartment.
4. Insert the holder into the compartment and tighten it from behind with a screw.
5. Click the compartment back into place... Done :)

It is advisable to embed the metal plate for the magnet a little further down, as this will provide more space for the ventilation grille!

The holder can of course also be modified for other purposes ;)

I printed it with PETG, PLA maybe not stable enough...