(WIP) Magnetic Tabletop Terrain Tiles

So I spent a bit of time on TinkerCAD, making tabletop terrain tiles. They're rather plain and generic, smooth walls, stairs, windows, doors, and floors. This is a Work-In-Progress project as I'm still creating new tile pieces.

I didn't want to print the walls too high as players at the table would have difficulty seeing what's behind them. Earlier prototype pieces with 2" tall walls gave my players difficulty when they were trying to find and move their miniature. Having 1" tall walls may look a little silly, but it's necessary for functionality.

It's strongly recommended that you print the Magnet Polarity Checker first as you'll need it to help keep all other tile magnet orientations aligned.

There are four types of platforms. F2 through F5 which is just floor 2, 3, 4, and 5. The platforms themselves are not terrain tiles, they have a magnet on the top to accomidate a regular sized F1 terrain tile.

Each terrain tile is 2.25" x 2.25". The height is 0.375" for the base tiles, and 1.375" for the tiles with walls. The door tiles are about 1.625" tall at the top arch. The platforms are 2.25" x 2.25". Their heights are F2 = 1", F3 = 2", F4 = 3", and F5 = 4" tall.

Each terrain tile requires nine 6x3mm round magnets which you can find here on Amazon:
https://a.co/d/9dUSlge

You can use just about any material you'd like to print them except TPU. I'd recommend keeping the infill relatively low, around 10% to 20%, depending on your personal preference.

I do not permit anyone to resell these files or the physical pieces.

EDIT 15OCT2025 Added 22 new tile pieces.
EDIT 18OCT2025 Added 19 new tile pieces.