SCI R13-244 switch cover

This model is for a SCI R13-244 switch. It is designed for outdoors which is why it incorporates a cover over the switch and a gap in the back for a sealing tape of some kind. It was originally designed for the outside of a camper, however it would work great for other applications as well.

It would work best as a material like PETG for outdoor use, however PLA will work, it just wont have a longevity of a more robust material.

This design has 6.5mm diameter screw holes and the perimeter of the cover is 90mm x 65mm.

You will also want the entire underneath to have support for the best result. The support shouldn't add much time or filament to the print as it is a small cavity.