BonBon Animatronic NHI

I am very tired writing and uploading this, so hopefully everything is here and somewhat correct.
This is BonBon, NHI means No Heated Inserts, so that means it's plastic on plastic.
You will need some mm screws. Amazon sells kits, but you only need 4 M2 screws for the eyes and a variety of M3 screws for the rest of him,
You will need 5 MG90S servos, or whatever servos are similar in size. 2 for each eye, and one for the jaw. You will need a large servo, like the 25kg servo or MG996R, you can pick any others that size since the mounting holes are similar, for the Neck to make him look left and right.
The eyes work like this : Eye--->Eye Holder-->X axis---> Head endo. The y axis ball snaps into place on the eye holder and you screw the eye endo connector into both the y axis and xaxis to go to your servos. Just print those sets twice.
The pictures in the list should help you figure it out
You will need to screw whatever servo horn you have into the neck to fit your larger servo. Amazon sells these metal disc horns that work great.

kinda assembly video https://www.youtube.com/watch?v=s8XFAfI2q1k

Printouts for the Iris 25 and 20mm --> https://docs.google.com/document/d/1JDihkd-gT2-gjP3ymP3we4GTVvF8ip1dILrr34c7_z4/edit?usp=sharing

You can get 25 and 20mm glass domes to fit the eyes and give them a cool look

Edit 11/9/25 added bottom endo mouth

Edit 11/16/25 Fixed the "Head Endo no inserts.stl" clipping into the Head shell support pole. And added a step file of the torso and handle so you can fit it to your hand or whatever else you want

Edit 1/4/26 Bottango save file and model setup. follow readme for more info https://drive.google.com/drive/folders/1uUocUdtaJCfQQew__YU58b5KdiOqVxXz?usp=sharing