Larger N Scale Water Tower with LED Collision Warning Light

When I first tried the source model I found it to be a bit small so I scaled it up to match my local water tower which is roughly 45' in diameter and 4-5 stories tall. While I was at it I made a walkway ring & added a hole for an aviation warning light on top. For that I used a 3mm blinking red LED I got off Amazon.

I used a white silk, but it was slightly translucent. To combat this I bumped the walls up to 4 and I made the last 10mm of the top solid to prevent the LED from making the whole tower glow. If you're using a more opaque filament you can likely use your normal default settings.